Drawer Standards

assembled box drawers
white and black drawers
  • Drawers are pre-finished, completely assembled and ready for installation.

  • Plywood and solid wood drawers have a bullnose top edge with a clear finish. Edgebanded tops are available.

  • Half-blind English dovetails are exposed on the drawer sides only.

  • Standard Drawer bottoms are installed 1/2” up from the bottom. Other configurations are available for special request.

  • Drawer bottoms are nailed in place then glued with hot-melt from the bottom side of the drawer for a secure, rattle-free fit.

  • Drawer bottom dado is concealed within the dovetail joint.

  • Drawer Sides are 1/16” lower than the front and back for a smooth joint on the top edge.

  • Drawer width and length available from 6” – 46”. (larger and smaller available as special request) Tolerances are 1/16” for width, depth, and height.

  • Because the drawer front and back are not readily visible once the drawer is installed, defects and patches in these areas are considered acceptable. Clean/Select fronts for rollout shelves are available upon request.

Additional Options

drawer with custom cubby holes

Custom Features Available

drawer with locking device installed

Installation of locking devices for undermount drawer slides (Blum, Grass, Salice, etc.)

Scooped Fronts for Roll Outs Sloped and Scallops Sides

Scooped Fronts for Roll Outs
Sloped and Scallops Sides

Prefinished Drawer Side Materials

File Folder Bars Installed

Materials:

Baltic Birch Plywood (12mm & 15mm)
Solid Maple (1/2″ & 5/8″)
Maple Plywood “ApplePly” (1/2″)
Solid Birch (5/8″)
Melamine
Other Materials Available upon request.

Other Options:

Notching for undermount drawer slides

We stock a variety of locking devices to install We also provide Knock-Down/Ready-to-Assemble Drawers upon request.